Multi-CD Player
Playing a CD
You can use this unit to control a multi-CD player,
which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 25.
1DISC NUMBERindicator
Shows the disc currently playing.
2TRACK NUMBERindicator
Shows the track currently playing.
3PLAY TIMEindicator
Shows the elapsed playing time of the cur-
rent track.
1 Press SOURCEto select the multi-CD
player.
Press SOURCEuntil you see Multi-CD displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Select a disc you want to listen to with the
1to 6buttons.
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as 1for disc 7, until the disc number
appears in the display.
•You can also sequentially select a disc by
pressing 5/∞.
4 To perform fast forward or reverse, press
and hold 2or 3.
5 To skip back or forward to another track,
press 2or 3.
Pressing 3skips to the start of the next track.
Pressing 2once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
•When the multi-CD player per forms the
preparatory operations, Readyis displayed.
•If the multi-CD player does not operate prop-
erly, an error message such as ERROR-11may
be displayed. Refer to the multi-CD player
owner’s manual.
•If there are no discs in the multi-CD player
magazine, NO DISC is displayed.
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
1
3
2
En
24
06
Section