Pioneer DEH-P80RS operation manual Adjusting loudness, Adjusting source levels, Audio Adjustments

Audio Adjustments

3Push MULTI-CONTROL left or right to select the equalizer band to adjust.

Each time MULTI-CONTROL is pushed left or right, equalizer bands are selected in the fol- lowing order:

20—31.5—50—80—125—200—315—500— 800—1.25k—2k—3.15k—5k—8k—12.5k— 20k (Hz)

4Push MULTI-CONTROL up or down to adjust the level of the equalizer band. Each time MULTI-CONTROL is pushed up or down, the level of the equalization band in- creases or decreases.

+6 to –6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust the level.

5Press BAND to cancel the 16-band gra- phic equalizer adjustment.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Use MULTI-CONTROL to select LOUD. LOUD appears in the display.

2Press MULTI-CONTROL to turn loudness

on.

# To turn loudness off, press MULTI-CONTROL again.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.

Section

11

!	Settings are based on the FM tuner volume	English
	level, which remains unchanged.

1Compare the FM tuner volume level with the level of the source you wish to ad- just.

2Use MULTI-CONTROL to select SLA. SLA appears in the display.

3Push MULTI-CONTROL up or down to adjust the source volume.

Each time MULTI-CONTROL is pushed up or down, source volume increases or decreases. SLA +4 to SLA –4 is displayed as the source volume is increased or decreased.

Notes

!The AM tuner volume level can also be ad- justed with source level adjustments.

!The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically.

!External unit 1 and external unit 2 are set to

the same source level adjustment volume automatically.

Auto TA and EQ (auto-time alignment and auto- equalizing)

The auto-time alignment is automatically ad- justed for the distance between each speaker and the listening position.

The auto-equalizer automatically measures the car interior acoustic characteristics, and then creates the auto-equalizer curve based on that information.

En 59