Section
12 Initial Settings
Notes
!You can match the clock to a time signal by pressing
—If the minute is 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)
—If the minute is 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)
!Even when the sources are off, the clock dis- play appears on the display. Pressing CLOCK
when the sources and feature demo are off, turns the clock display on or off.
–1 602 kHz allowable) to 10 kHz (530 – 1 640 kHz allowable).
1Use
2Press
Pressing
10kHz. The selected AM tuning step will ap- pear in the display.
Setting the FM tuning step
The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz.
1Use
2Press
Pressing
Note
If seek tuning is performed in 50 kHz steps, sta- tions may be tuned in imprecisely. Tune in the sta- tions with manual tuning or use seek tuning again.
Setting the AM tuning step
The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531
Switching the warning tone
If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.
1Use
Warning tone appears in the display.
2Press
ON appears in the display.
# To turn warning tone off, press
Switching the face auto open
For theft protection, the front panel opens automatically and easily detaches. Face auto open is on as a default.
1Use
Face auto open appears in the display.
2Press
ON appears in the display.
64 En