Pioneer DEH-P80RS Built-inCD Player, Using CD TEXT functions, Displaying disc titles

Section

05 Built-in CD Player

!When a multi-CD player that does not support disc title functions is connected, you cannot enter disc titles in this unit.

Displaying disc titles

You can display the text information of any disc that has had a disc title entered.

%Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

Play time—: disc title and play time

Using CD TEXT functions

Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artist’s name and playback time and are called CD TEXT discs. Only these spe- cially encoded CD TEXT discs support the functions listed below.

Displaying text information on CD TEXT discs

You can display the text information of any disc that has had a disc title entered.

%Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

Play time—: disc title and play time—:

disc artist name and play time—: track title

and play time—: track artist name and play

time—: disc title and : disc artist name

—: track title and : track artist name

#If specific information has not been recorded on a CD TEXT disc, title or name is not displayed.

Scrolling text information in the display

This unit can display the first 14 letters of disc title, disc artist name, track title and track ar- tist name. When the text information is longer than 14 letters, you can scroll the text informa- tion as follows.

%Press DISPLAY and hold until the text information begins to scroll through the display.

Note

When Ever Scroll is set to ON at the initial setting, CD text information scrolls continuously in the display. If you want to display the first 14 charac- ters of text information temporarily and scroll from the beginning, press and hold DISPLAY. Refer to Switching the Ever Scroll on page 67.

Selecting tracks from the track title list

Track title list lets you see the list of track titles on a CD TEXT disc and select one of them to play back.

1Turn MULTI-CONTROL to switch to the

track title list mode.

# You can also perform this operation by press- ing joystick on the remote control.

2Use MULTI-CONTROL to select the de- sired track title.

Turn to change the track title; press to play.

# You can also change the track title by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30

seconds, the track title list mode is canceled automatically.

22 En