Pioneer DEH-P80RS operation manual Tuner, Selecting stations from the preset channel list

Tuner

2Press MULTI-CONTROL to turn BSM on. Searching is displayed. While Searching is displayed, the six strongest broadcast frequen- cies will be stored under preset tuning num- bers 1–6 in the order of their signal strength. When finished, the preset channel list ap-

pears.

# To cancel the storage process, press

MULTI-CONTROL.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30 seconds, the preset channel list mode is can- celed automatically.

Note

Storing broadcast frequencies with BSM may re- place broadcast frequencies you have saved using buttons 1–6.

Selecting stations from the preset channel list

The preset channel list lets you see the list of preset stations and select one of them to re- ceive.

1Turn MULTI-CONTROL to switch to the

preset channel list mode.

# You can also perform this operation by press- ing joystick on the remote control.

2Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down.

Section

04

# If you do not operate the list within about 30 English

seconds, the preset channel list mode is can- celed automatically.

Notes

!You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the channel display.

!You can also recall stations assigned to preset tuning numbers 1–6 by pressing one of the

preset tuning buttons 1–6 on the remote con- trol.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1Use MULTI-CONTROL to select Local. Local appears in the display.

2Press MULTI-CONTROL to turn local seek tuning on.

Local seek sensitivity (e.g., Level 2) appears in

the display.

# To turn local seek tuning off, press MULTI-CONTROL again.

3Push MULTI-CONTROL left or right to set the sensitivity.

There are four levels of sensitivity for FM and two levels for AM:

FM: Level 1—Level 2—Level 3—Level 4

AM: Level 1—Level 2

The Level 4 setting allows reception of only

the strongest stations, while lower settings let you receive progressively weaker stations.

En 17