Pioneer DEH-P80RS operation manual Audio Adjustments Using BBE sound, Using BMX and compression

Audio Adjustments

Using BBE sound

With BBE, playback very close to the original sound can be obtained by correction with a combination of phase compensation and high-range boost for the delay of the high-fre- quency components and the amplitude devia- tion occurring during playback. This function makes it possible to reproduce the dynamic sound field as if you are listening to a live per- formance.

With BBE sound processing technology, you can adjust the level of BBE.

1Use MULTI-CONTROL to select BBE. BBE appears in the display.

2Press MULTI-CONTROL to turn BBE on.

# To turn BBE off, press MULTI-CONTROL again.

3Push MULTI-CONTROL up or down to adjust the level of BBE.

Each time MULTI-CONTROL is pushed up or down, the level of BBE increases or decreases. +4 to –4 is displayed as the level is increased or decreased.

Note

Manufactured under license from BBE Sound, Inc. The mark BBE is a trademark of BBE Sound, Inc.

Using BMX and compression

Using the BMX and COMP (compression) functions let you adjust the sound playback quality of this unit. Each of the functions has a two-step adjustment. BMX controls sound re- verberations to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best en- hances the playback of the track or CD that

Section

11

you are listening to. The COMP function bal-	English
ances the output of louder and softer sounds
at higher volumes.

1Use MULTI-CONTROL to select BMX. BMX appears in the display.

2Press MULTI-CONTROL to turn BMX on.

# To turn BMX off, press MULTI-CONTROL again.

3Push MULTI-CONTROL left or right to select the desired setting.

Each time MULTI-CONTROL is pushed left or right, settings are selected in the following

order:

COMP 1—COMP 2—BMX 1—BMX 2

Using the auto-equalizer

The auto-equalizer is the equalizer curve cre- ated by auto TA and EQ (refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on page 59).

You can turn the auto-equalizer on or off.

1Use MULTI-CONTROL to select A.EQ.

A.EQ appears in the display.

# If auto TA and EQ has not been carried out, Please set Auto EQ appears. This indicates that you cannot turn this function on.

2Press MULTI-CONTROL to turn the auto- equalizer on.

Auto EQ ON appears in the display.

# To turn auto-equalizer off, press MULTI-CONTROL again.

En 57