Initial Settings
#To turn the face auto open off, press
Switching the auxiliary setting
Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on page 68.
1Use
AUX1/AUX2 appears in the display.
2Press
ON appears in the display.
# To turn AUX off, press
Switching the dimmer setting
To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can turn the dimmer on or off.
1Use
2Press
on.
ON appears in the display.
# To turn dimmer off, press
Adjusting the brightness
You can adjust the display brightness. Initially this mode is set to 12.
Section
12
1 Use | English |
| |
Brightness. |
|
Brightness appears in the display. |
|
2 Push |
|
adjust the brightness level. |
|
Each time |
|
right, brightness level increases or decreases. |
|
00 to 15 is displayed as the level is increased |
|
or decreased. |
|
# When dimmer is functioning, the brightness |
|
level can be adjusted 00 to 10. |
|
Correcting distorted sound
When listening to a CD or other source on which the recording level is high, setting the equalizer curve level to high may result in dis- tortion. You can switch the digital attenuator to low to reduce distortion.
!Sound quality is better at the high setting so this setting is usually used.
1Use
Digital ATT appears in the display.
2Press
Pressing
switch between High (high) and Low (low) and that status will be displayed.
En 65