Pioneer DEH-P80RS operation manual Built-inCD Player Playing a CD, Selecting a track directly

Section

05 Built-in CD Player

Playing a CD

1

2

These are the basic steps necessary to play a CD with your built-in CD player. More ad- vanced CD operation is explained starting on the next page.

1Track number indicator Shows the track currently playing.

2Play time indicator

Shows the elapsed playing time of the cur- rent track.

1Press SOURCE to select the built-in CD player.

Press SOURCE until you see Compact Disc

displayed.

# If no disc is loaded in the unit, you cannot se- lect Compact Disc (built-in CD player). Insert a disc in the unit. (Refer to page 13.)

2To perform fast forward or reverse, push and hold MULTI-CONTROL left or

right.

# If you select Rough search, pushing and hold- ing MULTI-CONTROL left or right enables you to search every 10 tracks in the current disc. (Refer to Selecting the search method on page 20.)

3To skip back or forward to another track, push MULTI-CONTROL left or right. Pushing MULTI-CONTROL right skips to the start of the next track. Pushing MULTI-CONTROL left once skips to the start

of the current track. Pushing again will skip to the previous track.

Note

When a CD TEXT disc is inserted, the disc title automatically begins to scroll in the display. When Ever Scroll is set to ON at the initial setting, the disc title scrolls continuously. Refer to Switch- ing the Ever Scroll on page 67.

Selecting a track directly

When using the remote control, you can select a track directly by entering the desired track number.

1 Press DIRECT.

Track number input display appears.

2Press 0–9 buttons to enter the desired

track number.

# You can cancel the input number by pressing

CLEAR.

3Press DIRECT.

The track of entered number will play.

Note

After entering the number input mode, if you do not perform an operation within about eight sec- onds, the mode is automatically canceled.

18 En