Black plate (50,1)
Frontspeaker left—Front speaker right—Rear
speakerright—Rear speaker left—Subwoofer
left—Subwooferright
#Youcannot select subwoofer left and subwoo-
ferright when the subwoofer output is off.
5 PushMULTI-CONTROL up or down to
adjustthe distance between the selected
speakerand the listening position.
Eachtime MULTI-CONTROL is pushed up or
down,the distance increases or decreases.
400.00cmto 0.00cm is displayed as the dis-
tanceis increased or decreased, if you have
selectedcentimeters (cm).
160.0inchto 0.0inch is displayed as the dis-
tanceis increased or decreased, if you have
selectedinches (inch).
#Youcan adjust the distance for the other
speakersin the same way.
6 PressBAND to cancel the time align-
mentmode.
Using subwoofer outputThisunit is equipped with a subwoofer output
whichcan be turned on or off. When a sub-
wooferis connected to this unit, turn the sub-
wooferoutput on.
Thesubwoofer output phase can be switched
betweennormal and reverse.
1 UseMULTI-CONTROL to select
Subwoofer1.
Subwoofer1appears in the display.
#Youcan also select the subwoofer setting
menuby pressing SW on the unit.
2 PressMULTI-CONTROL to turn subwoo-
feroutput on.
ONappears in the display. Subwoofer output
isnow on.
#Toturn subwoofer output off, press
MULTI-CONTROLagain.
3 PushMULTI-CONTROL left or right to
selectstereo or monaural.
PushMULTI-CONTROL left to select monaural
andMONO appears in the display. Push
MULTI-CONTROLright to select stereo and
STEREOappears in the display.
Adjusting subwoofer settings
Whenthe subwoofer output is on,you can ad-
justthe cut-off frequency and the output level
ofthe subwoofer.
1 UseMULTI-CONTROL to select
Subwoofer2.
Subwoofer2appears in the display.
#Youcan also select the subwoofer setting
menuby pressing SW on the unit.
#Whenthe subwoofer output is on, you can se-
lectSubwoofer2.
2 PushMULTI-CONTROL left or right to
selectcut-off frequency.
Eachtime MULTI-CONTROL is pushed left or
right,cut-off frequencies are selected in the
followingorder:
50—63—80—100—125—160—200(Hz)
Onlyfrequencies lower than those in the se-
lectedrange are outputted from the subwoo-
fer.
3 PushMULTI-CONTROL up or down to
adjustthe output level of the subwoofer.
Eachtime MULTI-CONTROL is pushed up or
down,subwoofer level increases or decrease s.
+6to –24 is displayed as the level is increased
ordecreased.
<CRD4089-A/N>50
Audio Adjustments
En
50
Section
11