Black plate (58,1)
5 PressSOURCE and hold until the unit
turnsoff.
Ifanything is connected to the microphone
inputjack, disconnect it.
6 Pressand hold EQ to enter the autoTA
andEQ measurement mode.
7 Plugthe microphone into the micro-
phoneinput jack on this unit.
AUTOTA&EQ Microphone
8 PressMULTI-CONTROL to start the auto
TAand EQ.
9 Getout of the car and close the door
within10 seconds when the 10-second
count-downstarts.
Themeasurement tone (noise) is outputted
fromthe speakers, and auto TA and EQ be-
gins.
#Whenall speakers are connected, auto TA
andEQ is completed in about six minutes.
#Tostop auto TA and EQ, press
MULTI-CONTROLagain.
#Tocancel auto TA and EQ part way through,
pressBAND.
10 Whenauto TA and EQ is completed,
Setupcomplete is displayed.
Whencorrect measurement of car interior
acousticcharacteristics is not possible, an
errormessage is displayed. (Refer to Under-
standingauto TA and EQ error messages on
page69.)
11 PressBAND to cancel theauto TA and
EQmode.
12 Storethe microphone carefully in the
glovecompartment.
Storethe microphone carefully in the glove
compartmentor any other safe place. If the
microphoneis subjected to direct sunlight for
anextended period, high temperatures may
causedistortion, color change or mal-
function.
<CRD4089-A/N>58
Audio Adjustments
En
58
Section
11