Black plate (52,1)
–12—–6—Pass(0) (dB/oct.)
#Ifyou set the slope to 0 dB/oct. (Pass), the
audiosignal bypasses the filter, so the filter does
nothave an effect.
3 TurnMULTI-CONTROL to select
FrontHPF FREQ.
FrontHPF FREQ. appears in the display.
4 PushMULTI-CONTROL left or right to
selectcut-off frequency.
Eachtime MULTI-CONTROL is pushed left or
right,cut-off frequencies are selected in the
followingorder:
50—63—80—100—125—160—200(Hz)
Onlyfrequencies higher than those in the se-
lectedrange are output from the front speak-
ers.
5 PushMULTI-CONTROL up or down to
adjustthe output level of the front speak-
ers.
Eachtime MULTI-CONTROL is pushed up or
down,the level of the front speakers increases
ordecreases. 0to –24 is displayed as the level
isincreased or decreased.

Setting the high pass filter for

rearspeakers

1 UseMULTI-CONTROL to select
RearHPF.
RearHPF appears in the display.
2 PushMULTI-CONTROL left or right to
selectslope.
Eachtime MULTI-CONTROL is pushed left or
right,slopes are selected in the following
order:
–12—–6—Pass(0) (dB/oct.)
#Ifyou set the slope to 0 dB/oct. (Pass), the
audiosignal bypasses the filter, so the filter does
nothave an effect.
3 TurnMULTI-CONTROL to select
RearHPF FREQ.
RearHPF FREQ. appears in the display.
4 PushMULTI-CONTROL left or right to
selectcut-off frequency.
Eachtime MULTI-CONTROL is pushed left or
right,cut-off frequencies are selected in the
followingorder:
50—63—80—100—125—160—200(Hz)
Onlyfrequencies higher than those in the se-
lectedrange are output from the rear speak-
ers.
5 PushMULTI-CONTROL up or down to
adjustthe output level of the rear speak-
ers.
Eachtime MULTI-CONTROL is pushed up or
down,the level of the rear speakers increases
ordecreases. 0to –24 is displayed as the level
isincreased or decreased.
Using the auto-equalizer
Theauto-equalizer is the equalizer cur ve cre-
atedby auto TA and EQ (refer to Auto TA and
EQ(auto-time alignment and auto-equalizing)
onpage 56).
Youcan turn the auto-equalizer on or off.
1 UseMULTI-CONTROL to select Auto EQ.
AutoEQ appears in the display.
#Pleaseset Auto EQ appears. This indicates
thatyou cannot turn the auto-equalizer on if auto
TAand EQ has not been carried out.
2 PressMULTI-CONTROL to turn the auto-
equalizeron.
ONappears in the display.
#Toturn auto-equalizer off, press
MULTI-CONTROLagain.
<CRD4089-A/N>52
Audio Adjustments
En
52
Section
11