Black plate (54,1)
1 Recallthe equalizer curve you wantto
adjust.
SeeRecalling equalizer cur ves on the previous
page.
2 UseMULTI-CONTROL to select 16-band
graphicequalizer adjustment.
FREQ.appears in the display.
3 PushMULTI-CONTROL left or right to
selectthe equalizer band to adjust.
Eachtime MULTI-CONTROL is pushed left or
right,equalizer bands are selected in the fol-
lowingorder:
20—31.5—50—80—125—200—315—500—
800—1.25k—2k—3.15k—5k—8k—12.5k—
20k(Hz)
4 PushMULTI-CONTROL up or down to
adjustthe level of the equalizer band.
Eachtime MULTI-CONTROL is pushed up or
down,the level of the equalization band in-
creasesor decreases.
+6to –6is displayed as the level is increased
ordecreased.
#Youcan then select another band and adjust
thelevel.
5 PressBAND to cancel the 16-band gra-
phicequalizer adjustment.
Using BBE sound
WithBBE, playback very close to the original
soundcan be obtained by correction with a
combinationof phase compensation and
high-rangeboost for the delay of thehigh-fre-
quencycomponents and the amplitude devia-
tionoccurring during playback. This function
makesit possible to reproduce the dynamic
soundfield as if you are listening to a live per-
formance.
WithBBE sound processing technology, you
canadjust the level of BBE.
1 UseMULTI-CONTROL to select BBE.
BBEappears in the display.
2 PressMULTI-CONTROL to turn BBE on.
#Toturn BBE off, press MULTI-CONTROL
again.
3 PushMULTI-CONTROL up or down to
adjustthe level of BBE.
Eachtime MULTI-CONTROL is pushed up or
down,the level of BBE increases ordecreases.
+4to –4is displayed as the level is increased
ordecreased.
Note
Manufacturedunder license from BBE Sound,
Inc.The mark BBE is a trademark of BBE Sound,
Inc.
<CRD4089-A/N>54
Audio Adjustments
En
54
Section
11