Black plate (61,1)
2 PressMULTI-CONTROL to select the AM
tuningstep.
PressingMULTI-CONTROL repeatedly will
switchthe AM tuning step between 9 kHz and
10kHz. The selected AM tuning step will ap-
pearin the display.
Switching the warning toneIfthe front panel is not detached from the
headunit within four seconds of turning off
theignition, a warning tone will sound. You
canturn off the warning tone.
1 UseMULTI-CONTROL to select
Warningtone.
Warningtone appears in the display.
2 PressMULTI-CONTROL to turn warning
toneon.
ONappears in the display.
#Toturn warning tone off, press
MULTI-CONTROLagain.
Switching the face auto openFortheft protection, the front panel opens
automaticallyand easily detaches. Face auto
openis on as a default.
1 UseMULTI-CONTROL to select
Faceauto open.
Faceauto open appears in the display.
2 PressMULTI-CONTROL to turn the face
autoopen on.
ONappears in the display.
#Toturn the face auto open off, press
MULTI-CONTROLagain.
Switching the auxiliary settingAuxiliaryequipments connected tothis unit
canbe activated individually. Set each AUX
sourceto ON when using. About connecting
orusing auxiliary equipments, referto Using
theAUX source on page 64.
1 UseMULTI-CONTROL to select AUX1/
AUX2.
AUX1/AUX2appears in the display.
2 PressMULTI-CONTROL to turn AUX1/
AUX2on.
ONappears in the display.
#Toturn AUX off, press MULTI-CONTROL
again.
Switching the dimmer settingToprevent the display from being too bright at
night,the display is automatically dimmed
whenthe car ’s headlights are turned on. You
canturn the dimmer on or off.
1 UseMULTI-CONTROL to select Dimmer.
Dimmerappears in the display.
2 PressMULTI-CONTROL to turn dimmer
on.
ONappears in the display.
#Toturn dimmer off, press MULTI-CONTROL
again.
Adjusting the brightnessYoucan adjust the display brightness. Initially
thismode is set to 24.
1 UseMULTI-CONTROL to select
Brightness.
Brightnessappears in the display.
<CRD4089-A/N>61
Initial Settings
En 61
English
Section
12