Black plate (62,1)
2 PushMULTI-CONTROL left or right to
adjustthe brightness level.
Eachtime MULTI-CONTROL is pushed left or
right,brightness level increases or decreases.
0to31 is displayed as the level is increased or
decreased.
#Whendimmer is functioning, the brightness
levelcan be adjusted 0to 21.
Correcting distorted sound
Whenlistening to a CD or other source on
whichthe recording level is high, setting the
equalizercurve level to high mayresult in dis-
tortion.You can switch the digital attenuator
tolow to reduce distortion.
!Soundquality is better at the high setting
sothis setting is usually used.
1 UseMULTI-CONTROL to select
DigitalATT.
DigitalATT appears in the display.
2 PressMULTI-CONTROL to select the di-
gitalattenuator level.
PressingMULTI-CONTROL repeatedly will
switchbetween High (high) and Low (low)
andthat status will be displayed.
Switching the soundmuting/attenuation
Soundfrom this system is muted or attenu-
atedautomatically when the signal from the
equipmentwith mute function is received.
!Thesound is muted or attenuated, MUTE
orAT T aredisplayed and no audio adjust-
mentis possible.
!Soundfrom this system returns to normal
whenthe muting or attenuation is can-
celed.
1 UseMULTI-CONTROL to select Mute.
Muteappears in the display.
2 PressMULTI-CONTROL to select the de-
siredsetting.
PressMULTI-CONTROL repeatedly to switch
betweenthe following settings:
!TELmute Muting
!10dBATT Attenuation
!20dBATT Attenuation (20dB ATT has a
strongereffect than 10dB ATT)
Switching the feature demo
Thefeature demo automatically starts when
powerto this unit is turned off while the igni-
tionswitch is set to ACC or ON.
1 UseMULTI-CONTROL to select
Demonstration.
Demonstrationappears in the display.
2 PressMULTI-CONTROL to turn the fea-
turedemo on.
ONappears in the display.
#Toturn the feature demo off, press
MULTI-CONTROLagain.
Notes
!Rememberthat if the feature demo continues
operatingwhen the car engine is turned off, it
maydrain battery power.
!Youcan also turn on or off feature demo by
pressingDISPLAY while this unit is turned off.
Formore details, see Feature demo mode on
page8.
<CRD4089-A/N>62
Initial Settings
En
62
Section
12