Black plate (7,1)
Important
!Neveruse force or grip the display and the
buttonstoo tightly when removing or attach-
ing.
!Avoidsubjecting the front panel to excessive
shocks.
!Keepthe front panel out of direct sunlight and
hightemperatures.
!Afew seconds after turning the ignition
switchto on or off, the front panel automati-
callymoves. When this happens, your fingers
maybecome jammed in the panel, so keep
yourhands away from it.

Removing the front panel

1 Pressand hold EJECT to open the front
panel.
2 Slideand remove the front panel to-
wardyou.
Takecare not to grip it too tightly or to drop
thefront panel and protect it from contact
withwater or other fluidsto prevent perma-
nentdamage.
3 Putthe front panel into provided pro-
tectivecase for safe keeping.

Attaching the front panel

1 Makesure the inner cover is closed.
2 Replacethe front panel by clipping it
intoplace.
About the demo mode
Thisunit features two demonstration modes.
Oneis the reverse mode, the other is the fea-
turedemo mode.
Important
Thered lead (ACC) of this unit should be con-
nectedto a terminal coupled with ignition switch
on/offoperations. If this is not done, the vehicle
batterymay be drained.

Reverse mode

Ifyou do not per form an operation within
about30 seconds, screen indications start to
reverse,and then continue reversing ever y 10
seconds.Pressing BAND when power to this
unitis turned off while the ignition switch is
setto ACC or ON cancels the reverse mode.
PressBAND again to start the reverse mode.
<CRD4089-A/N>7
Before YouStart
En 7
English
Section
01