Displaying and setting the clock

You can turn the time display on or off and set the time.

Setting the time display on or off

1.Press NEXT to display “CLK”. Press NEXT until “CLK” appears.

2.Press CLK and then press ON/OFF to turn the time display on.

The light illuminates. When the time display is turned on, “TIME”, “DATE” and “JUST” appear simultaneously.

•Press ON/OFF again to turn the time dis- play off.

•If you press BAND and exit the calendar and time mode, the time display will appear instead of the source name.

Note:

•If you do not operate the function within about 60 seconds, the display is automatically returned.

When the time display is turned on, the calen- dar display appears with the time display when sources and the feature demo are off.

The calender display adjusted in this mode appears only when sources and the feature demo are off.

1.Press NEXT to display “CLK”. Press NEXT until “CLK” appears.

2.Press CLK and then press DATE to set the date.

3.Press 2 or 3 to switch between day, month and year.

4.Press 5 or ∞ to correct the date.

Pressing 5 advances the day, month or year.

Pressing ∞ turns back the day, month or year.

1.Press NEXT to display “CLK”. Press NEXT until “CLK” appears.

2.Press CLK and then press TIME to set the time.

3.Press 2 or 3 to switch between hour and minute.

4.Press 5 or ∞ to adjust the time.

Pressing 5 advances the hour or minute. Pressing ∞ turns back the hour or minute.

1.Press NEXT to display “CLK”. Press NEXT until “CLK” appears.

2.Press CLK and then press JUST to match the time to a time signal.

•If the minute is “00” – “29”, the minutes are rounded down. (e.g., “10:18” becomes “10:00”.)

•If the minute is “30” – “59”, the minutes are rounded up. (e.g., “10:36” becomes “11:00”.)

Note:

•During date adjustment, “JUST” is not displayed.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS