Setting the ASL display

1.Press ENT and then press MOVIE to select the movie mode.

2.Press any of the buttons MOVIE1 – MOVIE4 or ALL to select the desired movie.

•When you press ALL, you can display movies 1 to 4 sequentially.

Note:

•The movie screen will disappear temporarily when you perform other operations, but will be displayed again after three seconds.

Setting the spectrum analyzer display

There are four stored spectrum analyzer dis- plays to select from.

1.Press ENT and then press S/A to select the spectrum analyzer mode.

2.Press any of the buttons S/A1 – S/A4 to select the desired spectrum analyzer.

Note:

•The spectrum analyzer display will disappear tem- porarily when you perform other operations, but will be displayed again after three seconds.

You can display the ASL effect level. (Refer to page 62.)

Note:

•The ASL display will disappear temporarily when you perform other operations, but will be displayed again after three seconds.

The background visuals are only for display form 1 “FORM1”. There are five stored back- ground visuals to select from.

•When you select “FORM2”, “BG” is not dis- played and this mode is inactive.

1.Press ENT and BG and then press BGV to select the background visual mode.

2.Press any of the buttons BGV1 – BGV5 to select the desired visual.

The background still pictures are only for the display form 1 “FORM1”. There are 12 stored background still pictures to select from.

•When you select “FORM2”, “BG” is not dis- played and this mode is inactive.

1.Press ENT and BG and then press BGP to select the background still picture mode.

2.Press NEXT to switch between “BGP1” – “BGP6” and “BGP7” – “BGP12”.

3.Press any of the buttons BGP1 – BGP6 (or BGP7 – BGP12) to select the desired picture.

You can cancel the entertainment display (the movie screens, the spectrum analyzer displays, etc.).

•Press ENT and then press OFF to cancel the entertainment display.