Pioneer DEH-P900HDD operation manual Built-in CD Player, CD Eject button

Built-in CD Player

Display and indicators

FORM 1

qw

e r

FORM 2

q w r

et

qSource name wTrack number eDisc title rPlay time tTrack title

Basic operation

The built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not use an adapter when playing an 8 cm CD.

1.Press OPEN to open the front panel.

2.Insert a CD into the CD loading slot. CD loading slot

CD EJECT button

3. Close the front panel.

4.Press VOLUME to extend the VOLUME outward.

•When you press VOLUME, it extends out- ward so that it becomes easier to turn. To retract VOLUME, press it again.

5.Turn VOLUME to adjust the volume.

6.Press 2 or 3 to select a track.

Pressing 3 skips to the start of the next track.

Pressing 2 once skips to the start of the cur- rent track. Pressing again will skip to the previous track.

•If you press and hold 2 or 3, you can per- form fast forward or reverse.

7.Press OPEN and then press CD EJECT to eject the CD.

•Be sure to close the front panel after removing the CD.

WARNING:

•Do not use with the front panel left open. If the front panel is left open, it may result in injury in the event of an accident.

Note:

•You can select CD as the source by pressing SOURCE when a disc is loaded in this product.

•When the front panel is open, multi-function but- tons are not available.

•Do not insert anything other than a CD into the CD loading slot.

•A CD left partially inserted after ejection may incur damage or fall out.

•If a CD cannot be inserted fully or playback fails, make sure the recorded side is down. Press the CD EJECT and check the disc for damage before rein- serting it.

•If the built-in CD player cannot operate properly, an error message (such as “ERROR-12”) appears on the display. Refer to “Understanding built-in CD player error messages” on page 78.

23