Pioneer DV58AV_KU_EN Connecting using the S-Video output, Connecting using the component video output

Connecting using the S-Video output

If your TV (or other equipment) has an S-Video input, you can use the

S-Video output on this player instead of the standard (composite)

output for a better quality picture.

• Use an S-Video cable (not supplied) to connect the S-VIDEO

OUT to an S-Video input on your TV (or monitor or AV

receiver).

Line up the small triangle above the jack with the same mark on the

plug before plugging in.

Connecting using the component video output

You can use the component video output instead of the standard

video out jack to connect this player to your TV (or other equipment).

This should give you the best quality picture from the three types of

video output available.

• Use a component video cable (not supplied) to connect the

COMPONENT VIDEO OUT jacks to a component video input on

your TV, monitor or AV receiver.

This player can output 1080i/720p/480p from the component video

output. Compared to 480i, 1080i/720p/480p effectively doubles the

scanning rate of the picture, resulting in a very stable, flicker-free

image.

To set up the player for use with a progressive scan or HD (High

Definition) TV, see Resolution (Max) on page33. When the player

is set to output progressive scan video, the PRGSVE indicator lights

in the front panel display.

Important

• If you connect a TV that is not compatible with a 1080i/720p/480p

and switch the player to them, you will not be able to see any

picture at all. In this case, switch everything off and reconnect

using the supplied video cable (see Easy connections on

page 11), then switch back to 480i (see Switching the video

output to 480i using the front panel controls on page 12).

Switch the player to standby then, using the front panel controls,

press STANDBY/ON while pressing  to switch the player

back to 480i.

• If the player is connected using HDMI, disconnect the HDMI

cable before resetting the player to 480i output. (If left

connected, the HDMI output resolution will be reset to its

default — see Resetting the output resolution to the default

setting with HDMI connection on page 15.)

To S-Video input

To component video input

DV58AV_KU_EN.book 12 ページ２００７年８月３０日　木曜日　午後３時２３分