Black plate (39,1)
!DISCONNECTPHONE (disconnect phone)
!SETPHONE (registering phone)
!CLEARMEMORY (clear memory)
!NUMBERDIAL (call by entering number)
Ifconnected but not registered yet
Thefollowing functions cannot be operated.
!SEARCHPHONE (search and connect)
!CONNECTIONOPEN (connection open)
!CONNECTPHONE (connect phone)
!CLEARMEMORY (clear memory)
Ifalready connected and registered
Thefollowing functions cannot be operated.
!SEARCHPHONE (search and connect)
!CONNECTIONOPEN (connection open)
!CONNECTPHONE (connect phone)
!SETPHONE (registering phone)
Notes
!Youcan also select the function by pressing
FUNCTIONon the remote control.
!Toreturn to the previous display, press BACK.
!Toreturn to the main menu, press and hold
BACK.
!Toreturn to the playback display, press
BAND/ESC.
!DEVICEINFO is the same as that of the Blue-
toothaudio. (Refer to Displaying BD (Bluetooth
Device)address on page 37.)
!Ifa cellular phone is connected to this unit via
Bluetoothwireless technology with HSP
(HeadSet Profile), CLEAR MEMORY and
NUMBERDIAL cannot be selected.
!Ifyou do not operate functions other than
SEARCHPHONE,CONNECTION OPEN,
CONNECTPHONE,PH BOOK TRANSFER,
DISCONNECTPHONE,NUMBER DIAL and
CLEARMEMORY within about 30 seconds,
thedisplay automatically returns to the ordin-
arydisplay.
Connecting a cellular phone

Searchingfor available cellular phones

1 UseMULTI-CONTROL to select
SEARCHPHONE in the function menu.
2 PressMULTI-CONTROL to search for
availablecellular phones.
Whilesearching, SEARCHING flashes. When
availablecellular phones featuring Bluetooth
wirelesstechnology are found, device name or
NAMENOT FOUND (if names cannot be ob-
tained)is displayed.
#Ifthis unit fails to find any available cellular
phones,NOT FOUND is displayed.
3 TurnMULTI-CONTROL to select a device
nameyou want to connect.
#Youcan also perform the same operations by
pushingMULTI-CONTROL up or down.
4 PressMULTI-CONTROL to connect the
selectedcellular phone.
Whileconnecting, CONNECTING flashes. To
completethe connection, check the device
name(PIONEER BT UNIT) and enter the link
codeon your cellular phone. If the connection
isestablished, CONNECTED is displayed.
#PINcode is set to 0000 as the default. You
canchange this code in the initial setting. Refer
toEntering PIN code for Bluetooth wireless con-
nectionon page 31.

Usinga cellular phone to initiate a

connection

1 UseMULTI-CONTROL to select
CONNECTIONOPEN in the function menu.
2 PressMULTI-CONTROL to open the con-
nection.
ALWAYSWAITING flashes and the unit is
nowon standby for connection from a cellular
phone.
3 Usecellular phone to connect to this
unit.
#PINcode is set to 0000 as the default. You
canchange this code in the initial setting. Refer
toEntering PIN code for Bluetooth wireless con-
nectionon page 31.
<YRD5265-A/S>39
Available accessories
En 39
English
Section
06