Pioneer P4100UB operation manual Switching the Sirius display, Introduction of advanced operations

	Section
Available accessories	06

%Select a channel.

Push MULTI-CONTROL left or right.

#If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel num- ber continuously.

#You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.)

Note

It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel.

Switching the SIRIUS display

%Press DISP to switch the SIRIUS display. Each press of DISP changes the SIRIUS dis- play in the following order:

Channel name—Category name—Artist name

—Song title/program title—Composer name

# You can scroll the text information to the left by pressing and holding DISP.

Storing and recalling broadcast stations

You can easily store up to six broadcast sta- tions for later recall.

!Six stations for each band can be stored in memory.

1 Press LIST.

Preset screen is displayed.

2Use MULTI-CONTROL to store the se- lected station in memory.

Turn to change the preset number. Press and hold to store.

The SIRIUS preset number you have selected will flash and then remain lit. The selected sta- tion has been stored in memory.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

#You can also change the station by pushing MULTI-CONTROL up or down.

#If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display.

Note

You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down.

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option. Press to select.

3Turn MULTI-CONTROL to select the function.

CH SELECT MODE (channel select mode set- ting)—TEAM SETTING (team setting)— GAME ALERT SET (game alert setting)—

GAME INFO (game info)

# You can also perform the same operations by pushing MULTI-CONTROL up or down.

Notes

!You can also select the function by pressing FUNCTION on the remote control.

!To return to the previous display, press BACK.

!To return to the main menu, press and hold BACK.

!To return to the ordinary display, press BAND/ESC.

English

En 45