Pioneer PRS-D1100M owner manual Four Amplifier Ex. Bridge, Connecting the Unit

Connecting the Unit

Four Amplifier (Ex. Bridge)

MODE SELECT switch		Connect to a car stereo.
		For details, see the
must be in MASTER position.	SYNC OUTPUT
		“Connection Diagram”.

Connecting speaker wire (sold separately).

MODE SELECT switch must be in SYNC INV position.

Connecting wire with RCA pin plugs (sold separately).

SYNC OUTPUT

2 Ω to

16 Ω

SYNC INPUT	Connecting wire with RCA
	pin plugs (sold separately).
MODE SELECT switch must be
in SYNC INV position.
SYNC OUTPUT	SYNC INPUT

Connecting speaker wire (sold separately).

MODE SELECT switch must be in SYNC INV position.

Connecting wire with RCA pin plugs (sold separately).

SYNC INPUT

•Only use speakers having an impedance of 2 Ω to 16 Ω. In addition, in the case of connecting multiple speakers with a bridge, check that the synthetic impedance is at least 2 Ω.

•The setting of the POWER MODE switch varies according to the speaker impedance. Slide the POWER MODE switch to the HI-CURRENT position if the impedance is from 2 Ω to less than 4 Ω, or slide it to the NORMAL position if the impedance is from 4 Ω to 16 Ω. The same setting is used for four amplifiers.

•When switching to the SYNC INV mode, the seal over the MODE SELECT switch must be peeled off and you can find SYNC INV switch. Peel off the seal after checking that connections are correct.

11