Pioneer PRS-D1100M owner manual Replacing the terminal cover

Example of installation on the floor mat or on the chassis

1.Place the amplifier where it is to be

installed. Insert the supplied tap- ping screws (4 ⋅ 18 mm) into the screw holes. Push on the screws with a screwdriver so they make marks where the installation holes are to be located.

2.Drill 2.5 mm diameter holes at the point marked, and install the ampli- fier, either on the carpet or directly to the chassis.

Replacing the terminal cover

1.Align the unit and terminal cover, and insert the screw.

2.Tighten the screw with a 4 mm hexagonal wrench.

Screw Tapping-screws (4 ⋅ 18 mm)

Terminal Cover

Floor mat or chassis

Drill a 2.5 mm diameter hole

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ

14