
Two Amplifier (Ex. Bridge)
MODE SELECT switch must | SYNC OUTPUT | |
be in MASTER position. | ||
|
Connect to a car stereo. For details, see the “Connection Diagram”.
Connecting wire with RCA pin plugs (sold separately).
ENGLISH ESPAÑOL
2 Ω to 16 Ω
MODE SELECT switch must be in SYNC INV position.
Connecting speaker wire (sold separately).
SYNC INPUT
DEUTSCH
•Only use speakers having an impedance of 2 Ω to 16 Ω. In addition, in the case of connecting multiple speakers with a bridge, check that the synthetic impedance is at least 2 Ω.
•The setting of the POWER MODE switch varies according to the speaker impedance. Slide the POWER MODE switch to the
•When switching to the SYNC INV mode, the seal over the MODE SELECT switch must be peeled off and you can find SYNC INV switch. Peel off the seal after checking that connections are correct.
FRANÇAIS
Two Amplifier
1 Ω to 8 Ω
MODE SELECT switch must | SYNC OUTPUT |
be in MASTER position. |
MODE SELECT switch must be in SYNC position.
Connect to a car stereo. For details, see the “Connection Diagram”.
Connecting wire with RCA pin plugs (sold separately).
ITALIANO NEDERLANDS
SYNC INPUT
1 Ω to 8 Ω
•Use speakers having an impedance from 1 Ω to 8 Ω.
•The setting of the POWER MODE switch varies according to the speaker impedance. See the “Setting the Unit” section for details. The same setting is used for both amplifiers.
êìëëäàâ
10