Pioneer VSA-AX10Ai manual Resetting the remote control, Locking the remote control

01Before you start

2Use the + and – buttons to set the LCD TIMEOUT and BACKLIGHT TIMEOUT settings.

You can adjust these from 20–120 seconds.

•The backlight timeout can’t be longer than the LCD timeout setting.

TIMEOUT

LCD TIME OUT

-	60 sec	+
BACKLIGHT TIME OUT
-	60 sec	+

ENTER CANCEL

3Press ENTER when you’re finished. You’ll return to the remote setup menu.

Resetting the remote control

Use this feature to reset the remote control settings to the factory defaults.

Important

• Doing this will erase any of your personalized settings.

1 Press RESET TO DEFAULT.

SETUP 3/3

RESET TO DEFAULT

2Confirm by pressing YES after reading each screen.

After the screen goes blank, the Home menu appears within a minute or so, and the remote control will be reset to the default settings.

Locking the remote control

This amplifier has a remote control lock feature that makes the remote control touch screen and hard keys inoperative.

1 At the same time, press the and hard keys for about three seconds.

• This is not possible from the remote setup screen.

CHANNEL	ENTER
	VOLUME
MENU	MUTE
SYSTEM
SETUP

AV AMPLIFIRE

LOCKED! shows on the touch screen to indicate the remote control is locked.

2To unlock the remote control, repeat step 1. Once the remote control is unlocked, the touch screen shows the Home menu.

Restarting the remote control

If the remote control display freezes during operation (none of the buttons seem to work), you may need to restart the unit.

Important

•Doing this will not erase any of your personalized settings or presets.

1Use a small phillips screwdriver to remove the screw fixing the battery cover to the back of the remote.

RESET

Do you want to reset

the REMOTE to the DEFAULT settings ?

YES

NO

RESET

ALL settings you made

will be ERASED.

Is it all right?

YES

NO

10

En