Pioneer VSA-AX10Ai manual Controlling other equipment, Select a setting type

07Controlling other equipment

4From the ‘Replacing Device’ screen choose the type of component that you’ve connected.

In this example, we’re setting the remote to control a DVD player, so we’ll select DVD.

Replacing Device

PRESET RECALL

DVD

TV

DVD recorder

CANCEL

•It is best to have the input source button (DVD/LD) match the component.

5From the ‘Setting Makers’ screen, select the name of the company that makes your component.

Use the (cursor up/down) buttons to scroll through the available manufacturers. Here we’ll select Pioneer as an example.

Setting Makers

PRESET RECALL

Pioneer

AKAI

DENON

BACK CANCEL

6 Select a setting type.

There may be only one option listed, or there may be several. Start with the first button available, which will show the makers name and 1 (in this case Pioneer-1).

Setting Type

PRESET RECALL

Pioneer-1

Pioneer-2

BACK CANCEL

7Point the remote at the component and press TRY to test if you've set it up properly.

If the component you are trying to control turns on/off, the setup for this component is complete and you can go to step 8.

Following Setting?

PRESET RECALL

device : DVD

maker : Pioneer

type :

Pioneer-1

INSTALL TRY

BACK CANCEL

If the component doesn’t respond, it’s possible that:

•Your component manufacturer has several preset codes for the same component. Press BACK to go back and select another number (if there is one) from the list.

•Your component doesn't have a standby mode (and therefore won’t switch on/off).

•There is something blocking the path between the remote control and the remote sensor of the component you’re trying to control.

•The preset code is unavailable for your component. Press CANCEL to exit, then try using the method described in Programming signals from other remote controls below to program the component into the remote control. If your component type is different from the set of controls associated with the input source (for example you want to control an LD with the DVD/LD button), it is useful to choose INSTALL in the next step to change the screen to control the component you’ve connected.

8Press INSTALL to confirm and go back to the ‘Select Function’ screen to control another component.

Following Setting?

PRESET RECALL

device : DVD

maker : Pioneer

type :

Pioneer-1

PLEASE WAIT

INSTALL TRY

BACK CANCEL

From the Select Function screen (step 3), you can press

to exit and return to the remote control Home menu screen.

62

En