Manuals / Pioneer / Home Audio / Stereo Amplifier

Pioneer VSA-AX10Ai manual Listening in surround sound on

Models: VSA-AX10Ai

1 104
Download 104 pages 9.27 Kb
Page 93
Image 93

Additional information

11

Symptom

Cause

Remedy

No sound output from the front

• The U-shaped connectors that connect the

• Reconnect the POWER AMP IN terminals to the front

speakers.

POWER AMP IN terminals to the front

channel pre-outs using the supplied U-shaped connectors

 

channel pre outs are not connected.

(see item 8 in Rear panel on page 12).

 

 

 

 

• The front speakers are connected to the B

• Connect the front speakers to the A speaker system

 

speaker system jack.

jacks (see Installing your speaker system on page 24).

 

 

 

No sound from the surround or

• Speaker settings are incorrect. (for

• Check you speaker settings in Speaker Systems on

center speakers.

example, they have been set to NO).

page 52.

 

 

 

 

• The surround and/or center levels are

• Check the levels in Channel Level on page 54.

 

turned down.

 

 

 

 

 

• The surround and/or center speakers are

• Check Installing your speaker system on page 24 to

 

disconnected.

make sure the speakers are connected correctly.

 

 

 

 

• The STEREO listening mode has been

• Choose a surround listening mode (see Listening in

 

selected.

surround sound on page 39).

 

 

 

 

• Speaker system B is selected.

• Select speaker system A (see Switching the speaker

 

 

system on page 75).

•The 2 channel input setting is selected when using the multichannel analog inputs or the USB interface.

•Change the setting accordingly (see Selecting USB and multichannel analog input channels on page 45).

No sound from surround back speakers.

• Surround back speakers are set to NO.

• Set the surround back speakers to LARGE or SMALL

 

(see Speaker Systems on page 52).

•The SB CH mode is switched off.• Set the surround back channel to SB CH ON (see page 46).

• The source is not a 6.1 channel playback

• Choose an Advanced surround listening mode (see

source.

Listening in surround sound on page 39).

 

 

• The surround back speakers are

• Check Installing your speaker system on page 24 to

disconnected.

make sure the speakers are connected correctly.

 

 

• The surround back channel is on the 1

• Connect the speaker to the surround back left channel

speaker setting, and your speaker is

output (Installing your speaker system on page 24).

connected to the right channel output.

 

•The wrong input setting is selected when using the multichannel analog inputs or the USB interface.

•Change the setting accordingly (see Selecting USB and multichannel analog input channels on page 45).

 

• The SB CH MODE is switched to AUTO and

• You can still listen with surround back sound by setting

 

the Dolby Surround EX / DTS ES software

the surround back channel to SB CH ON (page 46).

 

you’re playing has no flag to indicate it is 6.1

 

 

compatible.

 

 

 

 

No sound from subwoofer.

• The subwoofer is disconnected or switched

• Connect or switch on the subwoofer (see Installing your

 

off.

speaker system on page 24).

 

 

 

 

• The subwoofer's settings are incorrect.

• Set the subwoofer (see Speaker Systems on page 52).

 

 

 

 

 

• Set the front speakers to SMALL (see Speaker Systems

 

 

on page 52).

 

 

 

 

• The crossover frequency is set too low.

• Set the crossover frequency to a (higher) frequency that

 

 

matches your speaker characteristics (see Speaker

 

 

Systems on page 52)

 

 

 

 

• The bass attenuator is set too low.

• See Bass Peak Level on page 86 to adjust the setting.

 

 

 

 

• The subwoofer's levels are too low.

• See Channel Level on page 54 to check the speaker

 

 

levels.

 

 

• Check the volume control on the subwoofer to make

 

 

sure it is turned up.

No sound from one speaker.

• The speaker setting has been set to NO.

• Change the setting in Speaker Systems on page 52.

• The speaker level is too low.

• Check the level in Channel Level on page 54.

 

 

• The speaker isn’t connected properly.

• Check Installing your speaker system on page 24 to

 

make sure the speaker is connected correctly.

• The source has no sound output for that

• By choosing an Advanced surround listening mode (see

channel.

Listening in surround sound on page 39), you may be able

 

to create an extra channel for the speaker.

 

 

The program indicator lights for • A mute signal is recorded on the channel.

 

a channel, but no sound is

 

output from the corresponding

 

speaker.

 

 

 

93

En

Page 92 Page 94
Page 93
Image 93
Pioneer VSA-AX10Ai manual Listening in surround sound on
Page 92 Page 94

VSA-AX10Ai specifications

The Pioneer VSA-AX10Ai is a high-end, multi-channel home theater receiver that stands out for its robust performance and cutting-edge technologies. Launched as a flagship model, it combines advanced audio processing capabilities with a formidable power output, catering to both audiophiles and home theater enthusiasts.

One of the standout features of the VSA-AX10Ai is its Direct Energy HD Amplification technology, which incorporates a Class D amplifier design. This technology not only ensures high power efficiency but also minimizes distortion, delivering pristine sound quality at high volumes. The receiver boasts a substantial output of 200 watts per channel over eight channels, making it an ideal choice for driving large, demanding speaker systems.

In terms of audio decoding, the VSA-AX10Ai supports a multitude of formats, including Dolby TrueHD and DTS-HD Master Audio. This feature allows the receiver to provide a cinematic surround sound experience, ensuring that every detail of the soundtrack is delivered with accuracy and clarity. The device is also equipped with a high-quality 24-bit/192 kHz DAC, assuring top-notch sound reproduction from a variety of sources.

The VSA-AX10Ai features Pioneer’s sophisticated MCACC (Multi-Channel Acoustic Calibration System), which automatically calibrates the audio output to match the room's acoustics. By measuring sound from each speaker and adjusting levels, delays, and equalization, it ensures a balanced sound field, regardless of room shape or speaker placement.

Connectivity is extensive, with multiple HDMI inputs offering 4K pass-through and upscaling capabilities. This makes the receiver well-suited for modern home theater setups that require integration with 4K Ultra HD displays. It also includes legacy inputs, ensuring compatibility with older audio and video equipment.

Another noteworthy characteristic is the receiver’s build quality. The VSA-AX10Ai features a rigid chassis designed to minimize vibration as well as a premium-grade power supply, which contributes to its overall reliability and performance.

Overall, the Pioneer VSA-AX10Ai encapsulates the essence of high-fidelity home audio and video. With its extensive feature set, exceptional sound quality, and robust performance capabilities, it remains a top choice for those seeking a comprehensive and immersive home theater experience. Whether for music playback or movie watching, this receiver delivers an unparalleled audio experience that stands the test of time.