Pioneer VSA-AX10Ai manual Connecting your equipment Chapter, Rear panel

02Connecting your equipment

Chapter 2

Connecting your equipment

This amplifier provides you with almost limitless possibilities for connecting your audio/video system, but it doesn’t have to be difficult. Depending on your needs, you could be up and running in no time after a few simple connections. This section has been designed so that you can read through this short introduction, then jump to the specific connections that you need to make. For a basic home theater setup, you may only need to look through the TV, DVD and speaker connections.

Rear panel

ININ

OUTOUT

DVR/

VCR1

ININ

OUTOUT

VCR2

ININ

OUTOUT

VCR3

ININ

L

VIDEO

Caution

•Before making or changing the connections, switch off the power and disconnect the power cord from the power outlet. Plugging in components should be the last connection you make with your system.

1 USB audio input

The USB audio input allows you to use your PC as a playback source for stereo or multichannel digital audio. See Using the USB interface on page 80 for connection details.

2 Digital audio outputs

Two optical digital audio outputs for connecting to a CD, MD or other digital recorder. See Connecting a VCR or DVD recorder on page 18 for connection details.

3 Digital audio inputs

Three optical and three coaxial digital audio inputs for connecting digital audio sources to this amplifier. There’s also a 2 RF IN jack for connection to an LD player with a 2 RF output.

All the inputs are freely assignable to input functions for maximum flexibility.

AC OUTLETT

FRONT

0W MAX

R

CENTER

AC INN

L

SUR-

ROUND

RROUND BACK & B )

R

L(Single)

SUR-

	15	1 DC OUT 12V
12V TRIGGER
		TOTAL 100mA MAX

2 SPEAK

•If a connected component does not correspond to the input function (DVD/LD, etc.), see Assigning the digital inputs on page 83 to assign it properly.

4Stereo analog audio source inputs/outputs Five sets of analog audio jacks for connection to audio sources such as CD players, tape decks, turntables, or a radio tuner. The CD-R/TAPE 1/MD and TAPE 2 MONITOR functions also feature outputs for recording. See Connecting analog audio sources on page 22 for connection details.

5Multichannel analog audio inputs

7.1channel analog inputs for connection to a DVD player with multichannel analog outputs. See Connecting the multichannel analog outputs on page 16 for connection details.

6 i.LINK connectors

Two S400-type i.LINK connectors allow you to connect this amplifier to other compatible i.LINK audio devices for high-resolution, multichannel digital audio input/ output. See Using the i.LINK interface on page 78 for connection details.

12

En