Pioneer VSA-AX10Ai manual Controlling other equipment Multi Operation and System Off

07Controlling other equipment

Multi Operation and System Off

The Multi Operation feature allows you to program a series of commands for the components in your system. For example, you could turn on your TV, turn on your DVD player and start playing the loaded DVD using only two buttons on the remote control.

Similar to multi operations, System Off allows you to use one button to stop and switch off a series of components in your system at the same time.

Note

•Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see Recalling preset codes on page 61 and Programming signals from other remote controls on page 63 for more on this).

•Power on and off commands only work with components that have a standby mode.

Programming a multi operation or a shutdown sequence

1Press MULTI OPERATION on the remote setup menu.

SETUP 1/3

CALIBRATE

PRESET RECALL

LEARNING

MULTI OPERATION

DIRECT FUNCTION

2 From the ‘Select Function’ screen, choose the

input function.

This will be the one that starts the multi operation when

you select it as an input source. For example, press DVD/

LD if the multi operation is being used to switch on the

If you are programming a shutdown (system off) sequence, select AMPLIFIER from the end of the list.

	Select Function
	MULTI OPERATION
	DVD/LD
	TV/DVD
	SAT
	CANCEL
• Use the	(cursor up/down) buttons to scroll

through the component options.

3Press ‘Add’ to choose an operation in the sequence.

If this is the first command in the sequence, the operation you’re adding will be placed at the top. Otherwise, the command will simply take the next place in the sequence.

DVD/LD

MULTI OPERATION

Add Replace Run

Delete Delay OK

4Choose the component and command you want to add to the multi operation or shutdown sequence.

For example, choose DVD/LD from the select function menu (this now takes the name of the multi-operation

component), then (play) or (stop) from the DVD menu to start (or stop) playback on your DVD player.

DVD player connected to the DVD/LD terminals.

DVD/LD

MULTI OPERATION

DVD/LD

TV/DVD

SAT

CANCEL

MULTI OPERATION END

DVD 1/2

DVD	TV
	CONT
AUDIO	SUBTITLE
DISPLAY	TOP MENU

• Press END to go back without making any changes.

66

En