Pioneer VSX-D908TX manual Preparation, Displays and Controls, =EXTERNAL DECODER IN button See p.47

=EXTERNAL DECODER IN button (See p.47)

Use to hook up an external component that can decode other types of signals and input them into the VSX-D908TX/D908TX-G.

~DIRECT button

Switches direct playback on or off. Use to bypass the tone controls and channel level for the most accurate reproduction of a program source. It will automatically put the receiver in STEREO mode for that function being used for DIRECT playback.

!LOUDNESS button (See p.48)

Switches the LOUDNESS mode on or off.

@MIDNIGHT MODE button (See p.46)

Switches the MIDNIGHT LISTENING mode on or off.

#DIGITAL NR button (See p.45)

Switches the DIGITAL NR on or off (STEREO mode only).

$SIGNAL SELECT button (See p.42)

Use to select the signal from the digital components.

SIGNAL SELECT repeatedly to select one of the following:

ANALOG : To select an analog signal.

DIGITAL : To select a optical or electrical digital signal.

%TUNER CONTROL button (See p.50-53)

CLASS : Press repeatedly to switch the preset station classes.

FM/AM : Press to select the AM or FM band.

TUNING –/+ :Use to manually tune to radio stations.

^STATION –/+ buttons (See p.52-53)

Use to choose programmed radio stations.

&MEMORY button (See p.52)

Press to start the memorization of a preset station.

*MPX button (See p.50)

Press to switch between auto stereo and MONO reception of FM broadcasts. When the broadcast signal is weak, selecting MONO will improve the sound quality.

(INPUT ATT button

Use to lower the input level of an analog signal that is too powerful, thus causing the receiver to distort (the overload indicator will light furiously).

)TREBLE (–/+) buttons (See p.48)

Use to adjust the high frequencies.

Displays and Controls

_BASS (–/+) buttons (See p.48)

Use to adjust low frequencies.

+SPEAKERS (A/B) buttons

A is the primary setting. It plays all speakers hooked up to the A system. A and B setting only plays the front speakers of both the A and B systems and the sub-woofer, multi channel sources will be down-mixed to these speakers so no sound will be lost. B setting only plays the front speakers connected to the B system and multi channel sources will be down-mixed to these two speakers.

A B A+B OFF

ÁVIDEO INPUT jacks (See p.9)

S-VIDEO :Video input for connecting a video camera (etc.), that has an S-Video out. VIDEO / AUDIO (L/R) : Video input for connecting a video camera, etc. that has standard video/audio outputs.

ªPHONES jack

Connect headphones for private listening (no sound will be heard through the speakers)

PREPARATION

23