Pioneer VSX-D938TX Multi Operations, Using Other Functions, 1Turn on your TV and the receiver

Using Other Functions

Multi Operations

Multi operations allow you to tell the receiver and your other components to do a number of things with the push of just two buttons on the remote control. For example, you can program the unit to turn on your TV, turn on your DVD player, go into a specific sound mode and start playing the loaded DVD. This feature allows you to decide which operations you want performed as well as the order in which you want them performed.

The steps below show you how to program a string of up to 5 different operations based on eight possible components. You do not need to program the power of this unit, or any PIONEER product, to go on, it/they will do so automatically when the MULTI OPERATION function is used. Also, for some DVD players you will not need to program a play command. Most DVDs will start to play automatically if their power goes on and a DVD is loaded.

Be sure to recall or teach the remote control commands for each component before attempting multi operations (see “Setting Up the Remote Control to Control Other Components,” p. 54).

				ë￿
	S0URCE			RECEIVER
		MULTI	SYSTEM
		OPERATION	OFF		3,4
	DVD/LD	TAPE1	VCR1	VCR2
		TV/SAT			1
		MULTI CONTROL
	CD	MD/	TUNER	TV CONT
	CLASS	MPX	BAND	DIRECT ACCESS
	¦￿	7	3	8
	- TUNING +		- STATION +
	1 Á￿		4 ¢		2
			- CHANNEL +
	1	2		3
	4	5		6
	7	8		9
	+10	0		DISC
	RF ATT			DISPLAY
		TV
	TV VOL	TV CONTROL		VOLUME
		TV FUNC
	EFFECT	MENU		MUTE
	/CH SEL
				FUNCTION
		ENTER
				SIGNAL
				SELECT
			2/dts
2	SYSTEM	THX	ADVANCED	STANDARD
	SETUP
				MPEG
	REMOTE	MIDNIGHT	DSP	STEREO
	SETUP
				DIGITAL NR

AV PREPROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

VSX-D938TX

1Turn on your TV and the receiver.

Make sure your TV is set to the appropriate video input (for example, VIDEO 1).

2Press REMOTE SETUP and 3 at the same time to select the MULTI OPERATION SETUP mode.

The REMOTE SETUP menu appears on your TV screen. The MULTI CONTROL and the SYSTEM OFF buttons start to blink.

To cancel MULTI OPERATION SETUP mode

Press REMOTE SETUP.

Multi-operation

1Select an item from the

Multi-Contorol buttons. (ex. DVD)

2Select the operation button. (ex. DVD = MENU)

3First command has been learned.

4You can repeat this proccess for 5 commands. EXIT=Remote setup

3Press FUNCTION that you want to use to start the

MULTI OPERATION.

You can use any MULTI CONTROL button for this procedure. It does not matter which one you choose but for example purposes we will use the DVD/LD button.

This MULTI CONTROL button will be used when you want to recall the MULTI OPERATION commands for use (see the next page: “Performing multi operations”).

Also, the SYSTEM OFF button will blink. See the next page for instructions how to use the SYSTEM OFF button.

OPERATION

4Press MULTI CONTROL for the component whose operation you want to start MULTI OPERATIONS with (for example, TV CONT button).

The selected button will light steadily.

•Each button can perform various preset multi operations (see step 5 on the next page).

69