Pioneer VSX-D908TX-G, VSX-D938TX manual Channel delay, Default setting is 3.0 m

Surround Sound Set Up

Channel delay

Adding a slight delay to some speakers is necessary to achieve a surround sound effect. You need to figure out the distance from your listening position to your speakers to add the proper delay. The following steps show you how to set the delay time for each channel by specifying the distances from your listening position to each speaker. Once you specify the speaker distances, the receiver calculates the correct delay times automatically. If continuing from SPEAKER SETTING, go to step 1. If starting fresh, complete steps 1-3 in “Setting Up for Surround Sound” (p.27) first.

			ë￿
S0URCE			RECEIVER
	MULTI	SYSTEM
	OPERATION	OFF
DVD/LD	TV/SAT	VCR1	VCR2
	MULTI CONTROL
CD	MD/	TUNER	TV CONT
	TAPE1
CLASS	MPX	BAND	DIRECT ACCESS
¦￿	7	3	8
- TUNING +		- STATION +
1 Á￿		4 ¢
		- CHANNEL +
1	2		3
4	5		6
7	8		9
+10	0		DISC
RF ATT			DISPLAY
	TV
TV VOL	TV CONTROL		VOLUME
	TV FUNC
EFFECT	MENU		MUTE
/CH SEL
1-3			FUNCTION
	ENTER		SELECT
			SIGNAL
		2/dts
SYSTEM	THX	ADVANCED	STANDARD
SETUP
			MPEG
REMOTE	MIDNIGHT	DSP	STEREO
SETUP
			DIGITAL NR
AV PREPROGRAMMED AND LEARNING
	REMOTE CONTROL UNIT

VSX-D938TX

1Select CHANNEL DELAY (if continuing from last set up, it will already be selected).

See “Setting Up for Surround Sound” on page 27 if you are unsure how to do this.

Press ENTER.

Channel Delay

Front L [3.0m]

Center [3.0m]

Front R [3.0m]

Surround R [3.0m]

Surround L [3.0m]

Subwoofer [3.0m]

[EXIT]

The default setting is 3.0 m.

2Use the 5´° buttons to select a speaker. Specify the distance from your listening position to each speaker using the commands below.

1Press 2 or 3 to adjust the speaker distance in 0.3 m. increments from 0.3 to 9.0 m.

2Use the 5´° buttons to move to the next set of speakers

3 Repeat for each speaker.

NOTE : Sound takes about 1 ms (millisecond) to travel 0.3 m.

SET UP

3Select EXIT with the 5´° buttons and press ENTER to return to the SYSTEM SETUP MENU.

Next, proceed to CHANNEL LEVEL below.

If you want to change a setting before proceeding

Simply use the arrow buttons to go back.

31