Pioneer VSX-D938TX Setting Up the Direct Function, Using Other Functions, NO by pressing, mode

Using Other Functions

Setting Up the Direct Function

The direct function is designed in case you have an external video source connected to your TV (a video source that is not going through the VSX-D938TX/D908TX/D908TX-G). For this explanation we will call this the “external video deck.” You would like to control external video deck with this unit’s remote control so you have assigned it a function button (for example purposes, the VCR 2 button). Yet, if you put the receiver in VCR 2 mode you will get no picture on your TV because the external video deck signal is not going through the VSX-D938TX/ D908TX/D908TX-G. To get around this problem, you set the DIRECT FUNCTION for VCR 2 to OFF. Now when you press VCR 2 function button you can control the external video deck with the remote control but the receiver does not go into VCR 2 mode.

S0URCE			RECEIVER		1 Press REMOTE SETUP and 4 at the same time to
			ë￿		select the DIRECT FUNCTION mode.
	MULTI	SYSTEM
	OPERATION	OFF			The MULTI CONTROL buttons DVD/LD, TV/SAT, VCR 1, VCR 2, CD,
DVD/LD	MULTI CONTROL		VCR2	2
	TV/SAT	VCR1			and MD/TAPE 1 start to blink.
CD	TAPE1	TUNER	TV CONT
	MD/
CLASS	MPX	BAND	DIRECT ACCESS
¦￿	7	3	8
- TUNING +		- STATION +			Direct Function
1 Á￿		4 ¢

	- CHANNEL +
1	2	3
4	5	6
7	8	9
+10	0	DISC
RF ATT		DISPLAY
	TV
TV VOL	TV CONTROL	VOLUME
	TV FUNC
EFFECT	MENU	MUTE
/CH SEL
		FUNCTION
	ENTER
		SIGNAL
		SELECT
	2/dts

You can choose whether the commander sends a function code or not , when you press each Multi-control button.

1Select function.

2Input YES or NO.

TRANSMIT YES =1 NO =2

EXIT=Remote setup

2Select a component by pressing its MULTI CONTROL button.

3

1

1,4

SYSTEM	THX	ADVANCED	STANDARD	3 Set the DIRECT FUNCTION of each external source to
SETUP
			MPEG
REMOTE	MIDNIGHT	DSP	STEREO	NO by pressing	2 .
SETUP
			DIGITAL NR

AV PREPROGRAMMED AND LEARNING	4 Press REMOTE SETUP to exit the DIRECT FUNCTION
REMOTE CONTROL UNIT	mode.
VSX-D938TX	The default setting is all YES. If you have turned a DIRECT
	FUNCTION to NO and want to turn it back to YES, follow the
	directions above and press 1 in step 3.

72