Pioneer VSX-D938TX Speaker impedance, Speaker terminals, While holding down the Speakers button

Connecting Your Equipment

7Speaker terminals

1 Twist exposed wire	2 Loosen speaker	3 Tighten terminal.
strands together.	terminal and insert
	exposed wire.

10 mm

Speaker impedance

You can change the speaker impedance to suit the kind of speakers you have in your home system but we recommend using speakers with an impedance of 8 Ω-16 Ω (the default setting). If you are using 6 Ω-less than 8Ω impedance speakers, you need to change the impedance setting.

w STANDBY/ON					First turn the receiver off, then press the power button
	VSX-D938TX
					while holding down the SPEAKERS button.
AUDIO/VIDEO MULTI-CHANNEL RECEIVER				Digital S	Choose the impedance setting by pressing the SPEAKERS button again.
STANDBY/ON	DSP	STEREO			You can choose the 8 Ω-16 Ω setting or the 6 Ω-8 Ω setting.
STANDBY	MODE
	/DTS
THX CINEMA ADVANCED		STANDARD
		MPEG
					SIGNAL	VOLUME
					SELECT	dB (This display indicates an 6 Ω-less than
					ANALOG SP A
5-CHANNEL EQUAL POWER OUTPUT			EXTERNAL			8 Ω impedance setting)
PHONES	VIDEO INPUT		DECODER IN DIRECT LOUDNESS MIDN
S-VIDEO	VIDEO L	AUDIO R
			SPEAKERS	– BASS + –
	SPEAKERS					To check which impedance the amplifier is set to hold down
						the SPEAKERS button for 2-3 seconds. You willl get a display
						like the one shown below right telling you the speaker
						impedance setting.

	SIGNAL		VOLUME		SIGNAL		VOLUME
	SELECT				SELECT
		SP A				SP A
	ANALOG		dB	or	ANALOG		dB
(This display indicates a 6 Ω-less				(This display indicates an 8 Ω-16 Ω
than 8 Ω impedance setting)				impedance setting)

PREPARATION

15