Pioneer VSX-D938TX manual Using Other Functions, Recording from Audio Components, set to analog

Using Other Functions

Recording from Audio Components

The following explanations show you how to record an analog audio signal with the component you connected to the MD/TAPE 1 or TAPE 2 MONITOR jacks. Note that you cannot record an component that is only connected digitally. If you want to record from a digital component, it must be connected in an analog manner as well. If you want to record a digital signal, see the next page.

The receiver’s volume, channel level, tone (BASS, TREBLE, and LOUDNESS), and surround effects have no effect on the recorded signal and the EXTERNAL DECODER input cannot be recorded.

S0URCE			RECEIVER		1 Select the source component and put the receiver in
			ë￿		that function. Remember, SIGNAL SELECT must be
	MULTI	SYSTEM
	OPERATION	OFF			set to analog.
DVD/LD	MULTI CONTROL		VCR2	1
	TV/SAT	VCR1
CLASS	MD/	BAND	DIRECT ACCESS		Press the SIGNAL SELECT button on the remote control (or use the
	MPX
CD	TAPE1	TUNER	TV CONT		button on the front panel) and choose ANALOG. Recording
¦￿	7	3	8
- TUNING +		- STATION +			DIGITAL or AC-3 RF (VSX-D938TX only) signals is not possible.
1 Á￿		4 ¢
		- CHANNEL +
1	2		3

4	5	6
7	8	9
+10	0	DISC
RF ATT		DISPLAY
	TV
TV VOL	TV CONTROL	VOLUME
	TV FUNC
EFFECT	MENU	MUTE
/CH SEL
		FUNCTION

ENTER

SIGNAL

SELECT

		2/dts
SYSTEM	THX	ADVANCED	STANDARD
SETUP
			MPEG
REMOTE	MIDNIGHT	DSP	STEREO
SETUP
			DIGITAL NR

2Start recording with a TAPE or MD (etc.).

3Playback the source to be recorded.

Record monitor (TAPE 2 MONITOR)

If you connect a cassette deck (etc.) with a record monitor function to the TAPE 2 MONITOR jacks, you can listen to the sound of the recording as it is recorded.

Press TAPE 2 MONITOR to switch between the sound of the recording (TAPE 2 indicator on) and the sound of the source component (TAPE 2 indicator off).

AV PREPROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

VSX-D938TX

66