Pioneer VSX-D938TX manual Remote Control of Other Components, Turn on your TV and the receiver

Remote Control of Other Components

Setting Up the Remote Control to Control Other Components

In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV, LD, CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and buttons, you only need to use one remote control. If your component(s) are listed in the remote control’s memory, simply follow the steps below. If your component(s) are not listed, or if you want the remote control to learn additional operations, you can use the learning mode to input the information from the remote controls supplied with your other components.

Recalling preset codes

The following steps show you how to recall preset codes stored in the remote control. Once a preset code is recalled and the component assigned, you can use this remote control to easily operate the component.

See “Preset Code List” on p.79-82 (VSX-D938TX), 83 (VSX-D908TX/D908TX-G) for the components and manufacturers available.

3

S0URCE	RECEIVER	1 Turn on your TV and the receiver.
	ë￿

	MULTI	SYSTEM		1	Make sure your TV is set to the appropriate video input (e.g. VIDEO
	OPERATION	OFF			1).
DVD/LD	TV/SAT	VCR1	VCR2
	MULTI CONTROL
CD	MD/	TUNER	TV CONT
	TAPE1
CLASS	MPX	BAND	DIRECT ACCESS		2 Press REMOTE SETUP.
- TUNING +		- STATION +
¦￿	7	3	8
1 Á￿		4 ¢			The REMOTE SETUP menu appears on your TV screen.
		- CHANNEL +
1	2		3
4	5		6		Select Remote
					Setup Mode
7	8		9		Remote SETUP+1
+10	0		DISC		Preset Recall
RF ATT			DISPLAY		Remote SETUP+2
	TV				Learning
TV VOL	TV CONTROL		VOLUME		Remote SETUP+3
	TV FUNC
					Multi-Operation
					Remote SETUP+4
EFFECT	MENU		MUTE		Direct Function
/CH SEL
			FUNCTION

2,3

ENTER

		SIGNAL
		SELECT
		2/dts
SYSTEM	THX	ADVANCED STANDARD
SETUP
		MPEG

REMOTE	MIDNIGHT	DSP	STEREO
SETUP
			DIGITAL NR
AV PREPROGRAMMED AND LEARNING
	REMOTE CONTROL UNIT

You have four set up options:

1PRESET RECALL

2 LEARNING

3 MULTI OPERATION (See p.69)

4 DIRECT FUNCTION (See p.72)

PRESET RECALL and LEARNING are the two modes that teach the remote control to operate your other components. It is easiest to start with PRESET RECALL and, if set up is not possible, move on to the LEARNING mode.

VSX-D938TX

3Press REMOTE SETUP and 1 at the same time to select the PRESET RECALL SETUP mode.

All the MULTI CONTROL buttons (except the TUNER button) start to blink.

To cancel the PRESET RECALL SETUP mode

Press REMOTE SETUP.

54