Planet Technology ADE-4300A/B, ADW-4300A/B Off, Off, Off, Off, PWR LED, LAN LED, ADSL LED, Blinking, Flashing, Flashing, STATUS LED, 10 LNK/ACT, 100 LNK/ACT, WLAN LED (ADW-4300only)

ADE-4300/ADW-4300 User Guide

Physical Details

Front-mounted LEDs of ADE-4300Figure 2-1: Front Panel of ADE-4300Front-mounted LEDs of ADW-4300

PWR LEDSTATUS LEDLAN LEDWLAN LED (ADW-4300 only)ADSL LED

Figure 3-2: Front Panel of ADW-4300

On - Power on.

Off - No power.

Off - Normal operation.

Blinking - This LED blinks during start up, and during a Firmware Upgrade.

For each port, there are 2 LEDs, to indicate the connection speed (10BaseT or 100BaseT) of each port.

∙100 LNK/ACT - This will be ON if the LAN connection is using 100BaseT, and Blinking if data is being transferred via the cor- responding LAN port.

∙10 LNK/ACT - This will be ON if the LAN connection is using 10BaseT, and Blinking if data is being transferred via the corre- sponding LAN port.

∙If neither LED is on, there is no active connection on the corre- sponding LAN port.

On - Wireless enabled.

Off - No Wireless connections currently exist.

Flashing - Data is being transmitted or received via the Wireless access point. This includes "network traffic" as well as user data.

On - ADSL connection is available. Off - No ADSL connection available.

Flashing - Data is being transmitted or received via the ADSL connection.

6