Connection Status - PPPoE & PPPoA
If using PPPoE (PPP over Ethernet) or PPPoA (PPP over ATM), a screen like the following example will be displayed when the "Connection Details" button is clicked.
Figure 44: PPPoE Status ScreenData - PPPoE/PPPoA Screen| Connection Time | This indicates how long the current connection has been |
| established. |
|
|
| PPPoE Link Status | This indicates whether or not the connection is currently |
| established. |
| ∙ If the connection does not exist, the "Connect" button |
| can be used to establish a connection. |
| ∙ If the connection currently exists, the "Disconnect" |
| button can be used to break the connection. |
| Negotiation | This indicates the status of the PPPoE Server login. |
|
|
IP Address | The IP Address of this device, as seen by Internet users. |
| This address is allocated by your ISP (Internet Service |
| Provider). |
|
|
Network Mask | The Network Mask associated with the IP Address above. |
|
|
Buttons |
|
| Connect | If not connected, establish a connection to your ISP. |
|
|
| Disconnect | If connected to your ISP, hang up the connection. |
|
|
| Close | Close this window. |
|
|
52