| Policy Name | Enter a unique name to identify this policy. This name is not | |
| supplied to the remote VPN endpoint. It is used only to help | |
| you manage the policies. | |
| Remote VPN | If the remote endpoint has a dynamic IP address, select | |
Endpoint | "Dynamic IP address". No "Address Data" input is required. | |
| Otherwise, select the desired option (IP address or Domain | |
| Name) and enter the address of the remote VPN endpoint | |
| you wish to connect to. | |
| Note: The remote VPN endpoint must have this VPN Gate- | |
| way's address entered as its "Remote VPN Endpoint". | |
| NetBIOS Enable | Check this if you wish NETBIOS traffic to be forwarded over | |
| the VPN tunnel. The NETBIOS protocol is used by Microsoft | |
| Networking. | |
Local LAN |
|
|
Local LAN | This identifies which PCs on your LAN are covered by this | |
| policy. For each selection, data must be provided as follows: | |
| ∙ | Single address |
|
| Enter an IP address in the "IP address" field. Typically, |
|
| this setting is used when you wish to make a single |
|
| Server on your LAN available to remote users. |
| ∙ | Subnet address |
|
| Enter an IP address in the "IP address" field, and the de- |
|
| sired network mask in the "Subnet Mask" field. |
| The remote VPN endpoint must have these IP addresses | |
| entered as its "Remote" addresses. | |
Remote LAN |
|
|
Remote LAN | This identifies which PCs on the remote LAN are covered by | |
| this policy. For each selection, data must be provided as | |
| follows: | |
| ∙ Single PC - no subnet | |
|
| Select this option if there is no LAN (only a single PC) at |
|
| the remote endpoint. If this option is selected, no addi- |
|
| tional data is required. |
| ∙ | Single address |
|
| Enter an IP address in the "IP address" field. This must |
|
| be an address on the remote LAN. Typically, this setting |
|
| is used when you wish to access a server on the remote |
|
| LAN. |
| ∙ | Subnet address |
|
| Enter an IP address in the "IP address" field, and the de- |
|
| sired network mask in the "Subnet Mask" field. |
| The remote VPN endpoint must have these IP addresses | |
| entered as its "Local" addresses. | |
80