Chapter 4

4

PC Configuration

This Chapter details the PC Configuration required on the local ("Inter- nal") LAN.

Overview

For each PC, the following may need to be configured:

∙TCP/IP network settings

∙Internet Access configuration

∙Wireless configuration (ADW-4300 only)

Windows Clients

This section describes how to configure Windows clients for Internet access via the ADE-4300/ADW-4300.

The first step is to check the PC's TCP/IP settings.

The ADE-4300/ADW-4300 uses the TCP/IP network protocol for all functions, so it is essential that the TCP/IP protocol be installed and configured on each PC.

TCP/IP Settings - Overview

If using the default ADE-4300/ADW-4300’s settings, and the default Windows TCP/IP settings, no changes need to be made.

∙By default, the ADE-4300/ADW-4300 will act as a DHCP Server, automatically providing a suitable IP Address (and related information) to each PC when the PC boots.

∙For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP client.

If using a Fixed (specified) IP address, the following changes are re- quired:

∙The Gateway must be set to the IP address of the ADE-4300/ADW-4300

∙The DNS should be set to the address provided by your ISP.

If your LAN has a Router, the LAN Administrator must reconfigure the Router itself. Refer to Chapter 8 - Advanced Setup for details.

26