Setup

Configuration Program

The ADE-4300/ADW-4300 contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Your Browser must support JavaScript.

The configuration program has been tested on the following browsers:

∙Netscape V4.08 or later

∙Netscape 7

∙Internet Explorer V5.01 or later

Preparation

Before attempting to configure the ADE-4300/ADW-4300, please ensure that:

∙Your PC can establish a physical connection to the ADE-4300/ADW-4300. The PC and the ADE-4300/ADW-4300 must be directly connected (using the Hub ports on the ADE-4300/ADW-4300) or on the same LAN segment.

∙The ADE-4300/ADW-4300 must be installed and powered ON.

∙If the ADE-4300/ADW-4300's default IP Address (192.168.0.1) is already used by another device, the other device must be turned OFF until the ADE-4300/ADW- 4300 is allocated a new IP Address during configuration.

Using your Web Browser

To establish a connection from your PC to the ADE-4300/ADW-4300:

1.After installing the ADE-4300/ADW-4300 in your LAN, start your PC. If your PC is already running, restart it.

2.Start your WEB browser.

3.In the Address box, enter "HTTP://" and the IP Address of the ADE-4300/ADW- 4300, as in this example, which uses the ADE-4300/ADW-4300's default IP Ad- dress:

HTTP://192.168.0.1

4.When prompted for the User name and Password, enter default user name admin and leave the password field blank (no password).

11