Planet Technology ADE-4300A/B, ADW-4300A/B Note:, ADSL port, Rear Panel, POWER port, 10/100BaseT LAN connections, Figure 4-1:Rear Panel of ADE-4300, Figure 5-2:Rear Panel of ADW-4300

Introduction

Rear PanelFigure 4-1: Rear Panel of ADE-4300

RESET Button (Reset to De- faults)POWER port 10/100BaseT LAN connectionsADSL port

Figure 5-2: Rear Panel of ADW-4300

This button will reset the ADE-4300/ADW-4300 to the factory default settings.

To do this, press and hold the Reset Button for five (5) sec- onds, until the Status LED is lit, then release the Reset Button, and wait the ADE-4300/ADW-4300 to restart using the factory default values.

Connect the supplied power adapter here.

Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports.

Note:

Any LAN port on the ADE-4300/ADW-4300 will automatically function as an "Uplink" port when required. Just connect any port to a normal port on the other hub, using a standard LAN cable.

Connect this port to your ADSL line.

7