Firewall Rules
The Firewall Rules screen allows you to define "Firewall Rules" which can allow or prevent certain traffic. "Traffic" means incoming connection attempts, not packets.
By default:
∙All Outgoing traffic is permitted.
∙All Incoming traffic is denied.
Because of this default behavior, any Outgoing rules will generally Block traffic, and Incoming rules will generally Allow traffic.
Firewall Rules ScreenAn example screen is shown below.
Figure 51 Firewall ScreenData - Firewall RulesIncoming Rules# | For the default rule, this will display "Default". |
| For rules which you create, this will display a radio button which |
| allows you to select the rule. |
|
|
Enable | Indicates whether or not the rule is currently enabled. |
| For rules you have added, this column will contain a checkbox, |
| allowing you to easily enable or disable the rule. (Click "Save" |
| after making any changes.) |
Service Name | The Service covered by this rule. |
|
|
Action | The action performed on connections which are covered by this |
| rule. |
LAN Server | The PC or Server on your LAN to which traffic covered by this |
| rule will be sent. |
WAN Users | The WAN IP address or addresses covered by this rule. |
|
|
64