ADE-4300/ADW-4300 User Guide

To connect:

∙Check the checkbox Allow me to connect to the selected wireless network, even though it is not secure.

∙The Connect button will then be available. Click the Connect button, and wait a few seconds for the connection to be established.

If using WEP Data Encryption

If WEP data encryption has been enabled on the ADW-4300, Windows will detect this, and show a screen like the following.

Figure 31: WEP (Windows XP)To connect:

∙Enter the WEP key, as set on the ADW-4300, in the Network Key field.

∙Re-enter the WEP key into the Confirm Network key field.

∙Disable the checkbox Enable IEEE 802.1x authentication for this network.

∙Click the Connect button.

If this fails, click the Advanced button, to see a screen like the following:

40