ADE-4300/ADW-4300 User Guide

If you can't connect

If the ADE-4300/ADW-4300 does not respond, check the following:

∙The ADE-4300/ADW-4300 is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command:

∙Open the MS-DOS window or command prompt window.

∙Enter the command:

ping 192.168.0.1

If no response is received, either the connection is not working, or your PC's IP address is not compatible with the ADE-4300/ADW-4300's IP Address. (See next item.)

∙If your PC is using a fixed IP Address, its IP Address must be within the range 192.168.0.2 to 192.168.0.254 to be compatible with the ADE- 4300/ADW-4300's default IP Address of 192.168.0.1. Also, the Network Mask must be set to 255.255.255.0. See Chapter 4 - PC Configuration for details on checking your PC's TCP/IP settings.

∙Ensure that your PC and the ADE-4300/ADW-4300 are on the same network segment. (If you don't have a router, this must be the case.)

∙Ensure you are using the wired LAN interface. The Wireless interface can only be used if its configuration matches your PC's wireless set- tings. (ADW-4300 only)

Setup Wizard

The first time you connect to the ADE-4300/ADW-4300, the Setup Wizard will run automatically. (The Setup Wizard will also run if the ADE-4300/ADW-4300's default settings are restored.)

1. Step through the Wizard until finished.

∙You need the data supplied by your ISP. Most connection methods require some data input.

∙The common connection types are explained in the following table.

2.On the final screen of the Wizard, run the test and check that an Internet connec- tion can be established.

3.If the connection test fails:

∙Check all connections, and the front panel LEDs.

∙Check that you have entered all data correctly.

12