Content Security Gateway User’s Manual

„My ID/Peer ID: My ID and Peer ID are optional parameters. If we choose to enter My ID/ Peer ID, they couldn’t be the same. For instance, My ID is 11.11.11.11 and Peer ID is 22.22.22.22. If you want to use number or text, add @ in the front, for instance, @123A and @abcd123.

„GRE/IPSec: Select GRE/IPSec (Generic Routing Encapsulation) packet seal technology. You may enter IP to be identified for both VPN gateways.

„Dead Peer Detection : Configure the timing to detect the VPN status. If failed, CS-500 will disconnect the VPN tunnel.

For the complete VPN setting, you can refer to the example for more detail information.

4.3.8.2 PPTP Server

This function allows the remote client dialup to your local network and access local resources by PPTP (Point to Point Tunnel Protocol) client software.

Entering the PPTP Server window: Select VPN→PPTP Server.

ÍÍ

„PPTP Server：Click Modify to select Enable or Disable.

„Client IP Range: Display the IP addresses range for PPTP Client connection.

„User Name：Displays the PPTP Client user’s name for authentication.

„Client IP：Displays the PPTP Client’s IP address for authentication.

„Uptime：Displays the connection time between PPTP Server and Client.

„Configure：Click Modify to modify the PPTP Client settings or click Remove to remove the item.

Modifying PPTP Server DesignStep 1. Select VPN→PPTP Server.

Step 2. Click Modify after the Client IP Range.

Step 3. In the Modify Server Design Window, enter appropriate settings.

- 97 -