Content Security Gateway User’s Manual

Configure: To change the service configuration, click Configure to change the parameters; click Delete to delete the configuration.

This virtual server provides four real IP addresses, which means you can setup four virtual servers at most. The administrator can select Virtual Server1/2/3/4 under Virtual Server selection in the menu bar on the left hand side, click Server Virtual IP to add or change the virtual server IP address; click “Click here to configure” to add or change the virtual server service configuration.

Configuring a Real IP for a Virtual Server

Step 1. Click an available virtual server from Server 1/2/3/4 in the Virtual Server menu bar to enter the virtual server configuration window.

Step 2. Click the click here to configure button and the Add new Virtual Server IP window appears and asks for an IP address from the WAN network.

Step 3. Select an IP address from the drop-down list of available WAN network IP addresses. Step 4. Click OK to add new Virtual Server or click Cancel to cancel adding.

Modifying a Virtual Server IP Address

Step 1. Click the Server 1/2/3/4 to modify the configuration under the Virtual Server menu bar. A new

window appears displaying the IP address and service of the specified virtual server.

Step 2. Click on the Virtual Server’s IP Address button at the top of the screen.

Step 3. Choose a new IP address from the drop-down list.

Step 4. Click OK to save new IP address or click Cancel to discard changes.

- 89 -