Content Security Gateway User’s Manual

„Disable PPTP: Check to disable PPTP Server.

„Enable PPTP: Check to enable PPTP Server. Encryption: the default is set to disabled.

Client IP Range: Enter the IP range allocated for PPTP Clients when they connect to the PPTP server.

„Allow remote client to connect to Internet: Check to allow remote PPTP client accessing Internet via PPTP tunnel.

„Auto-Disconnect if idle □ minutes: Configure this device to disconnect to the PPTP Server when there is no activity for a predetermined period of time. To keep the line always connected, set the number to 0.

„Echo-Request:Configure the timing to detect the VPN status. If failed, CS-500 will disconnect the VPN tunnel.

Step 4. Click OK to save modifications or click Cancel to cancel modifications

Adding PPTP ServerStep 1. Select VPN→PPTP Server. Click New Entry.

Step 2. Enter appropriate settings in the following window.

„User name: Specify the PPTP client. This should be unique.

„Password: Specify the PPTP client password.

„Client IP assigned by:

1.IP Range: check to enable auto-allocating IP for PPTP client to connect.

2.Fixed IP: check and enter a fixed IP for PPTP client to connect.

- 98 -