Content Security Gateway User’s Manual

setup by the Administrator.

How to use Statistics

The Administrator can get the current network status from statistics, and use the information provided by statistics as a basis to mange networks.

How to apply WAN Statistics

The Administrator needs to go to Policy to set the network IP addresses that you want to gather statistics. In this way, the administrator can handle the whole network condition and takes it as a basis of managing the network.

The administrator needs to go to the Policy to set the network IP of the statistics. By the WAN statistics you can obtain the status of the network.

4.8.3.1 WAN Statistics

Step 1. Click Statistics in the menu bar on the left hand side, and then select WAN Statistics.

Step 2. The WAN Statistics will be displayed. It displays statistics of WAN network connections (downstream and upstream as well) in a total amount by minute (60 minutes), hour (24 hours), day (30 days), Month and Year. Select the time units (minute, hour, day, month or year) of the graph.

Y-Coordinate: Four options are available: Total, Bits/sec, Bytes/sec and Utilization.

X-Coordinate: Time（Hour/Minute/Day）.

4.8.3.2 Policy Statistics

- 206 -