Content Security Gateway User’s Manual
Ping: Select this to allow the WAN network to ping the IP Address of the Content Security Gateway. This will allow people from the Internet to be able to ping the Content Security Gateway. If set to enable, the device will respond to echo request packets from the WAN network.
HTTP: Select this to allow the device WebUI to be accessed from the WAN network. This will allow the WebUI to be configured from a user on the Internet. Keep in mind that the device always requires a username and password to enter the WebUI.
For PPTP (European User Only): This is mainly used in Europe. You need to know the PPTP Server address as well as your name and password.
User Name: The user name is provided by ISP.
Password: The password is provided by ISP.
IP Address: Enter the static IP address assigned to you by your ISP, or obtain an IP address automatically from ISP.
PPTP Gateway: Enter the PPTP server IP address assigned to you by your ISP.
Connect ID: This is the ID given by ISP. This is optional.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
The PPPoE connection will automatically disconnect after a length of idle time (no activities). Enter in the amount of idle minutes before disconnection. Enter ‘0’ if you do not want the PPPoE connection to disconnect at all.
Ping: Select this to allow the WAN network to ping the IP address of the Content Security Gateway. This will allow people from the Internet to be able to ping the Content Security Gateway. If set to enable, the device will respond to echo request packets from the WAN network.
- 41 -